Dodge B100 — Brakes
High risk
Apr 10, 1984
Model years: 1984
Certain vehicles may have a brake system master cylinder internal piston seal vacuum venting malfunction. Lack of internal vacuum venting may result in the intermittent loss of fro
Also affects: Dodge B200, Dodge B300, Dodge D100, Dodge D200, Dodge D400
Dodge B100 — Structure
High risk
Oct 7, 1983
Model years: 1981, 1982, 1983
On certain vehicles, the bumper support bracket may contact with the fuel tank in a rear impact. This may cause fuel tank leakage. CMVSS 301 - fuel system integrity.
Also affects: Dodge B200, Dodge B300
Dodge B100 — Steering
High risk
Jul 14, 1980
Model years: 1975, 1976
Certain vehicles may be equipped with flexible steering couplings that were machined by the supplier with the roll pin hole out of location. This condition results in looseness of
Also affects: Dodge B200, Dodge B300, Dodge Cb300, Dodge Mb300, Dodge Mb400
Dodge B100 — Other
High risk
May 30, 1980
Model years: 1980
On certain vehicles, the hinge and roller assemblies supporting the rear of the sliding side door are subject to failure as a result of processing deficiencies in the aluminum hing
Also affects: Dodge B200, Dodge B300
Dodge B100 — Brakes
High risk
Apr 27, 1979
Model years: 1978
On certain vehicles, improper front brake hose routing may allow the brake hoses to rub against the tire and wheel assemblies during extreme turning angles. This may result in brak
Also affects: Dodge B200, Dodge B300, Dodge Cb300, Dodge Mb300
Dodge B100 — Suspension
High risk
Apr 27, 1979
Model years: 1979
On certain vehicles, the front suspension lower control arms may fracture adjacent to the lower ball joint resulting in separation of the ball joint from the control arm and loss o
Also affects: Dodge B200, Dodge B300, Dodge Cb300, Dodge Mb300
Dodge B100 — Seats And Restraints
High risk
Apr 12, 1978
Model years: 1978
On certain vehicles, the unibelts on the passenger side may not comply with the belt length requirements of CMVSS 209 when the passenger seat is in the full forward position.
Also affects: Dodge B200, Dodge B300
Dodge B100 — Brakes
High risk
Jun 8, 1977
Model years: 1977
On certain vehicles, the brake pedal pushrod prevailing torque nut attachment may not have been adequately tightened and can disengage from the pushrod bolt resulting in a loss of
Also affects: Dodge B200, Dodge B300
Dodge B100 — Powertrain
High risk
May 16, 1975
Model years: 1975
On certain vehicles, the automatic transmission may have a steering column gear shift tube improperly secured to the gear shift lever housing, due to the omission of an assembly st
Also affects: Dodge B200, Dodge B300
RecallTracker