Ford Bronco Ii Recalls

A SHORT CIRCUIT COULD DEVELOP IN THE IGNITION SWITCH THAT COULD LEAD TO OVERHEATING, SMOKE, AND POSSIBLY FIRE IN THE STEERING COLUMN OF THE VEHICLE. THIS CONDITION MAY OCCUR WHILE

THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 1103 - EXHAUST EMISSIONS. NITROUS OXIDE LEVELS EXCEED THE STANDARD. CORRECTION: OWNERS WILL BE PROVIDED WITH REVISED STARTING INSTRUCTI

NOTE: ALSO INCLUDES SOME MEDIUM AND HEAVY TRUCKS. THESE VEHICLES MAY NOT COMPLY WITH C.M.V.S.S. 108 - LIGHTING. DAYTIME RUNNING LIGHT MODULE MAY MALFUNCTION WHICH CAN RESULT IN DAY

THE PARK MECHANISM OF THE A4LD AUTOMATIC TRANSMISSION MAY NOT ENGAGE WHEN THE SELECTOR LEVER IS PLACED IN THE "PARK" POSITION. IF PARKED ON AN INCLINE, THE VEHICLE MAY ROLL AS IF I

THIS RECALL SUPERSEDES RECALL 90-27 FOR VEHICLES IN THE MARITIMES. THE THROTTLE MAY STICK IN AN OPEN POSITION DUE TO LINKAGE BINDING CAUSED BY CORROSION. THIS WOULD CAUSE THE ENGIN

RANGER/BRONCO II - 2.9 LITRE ENGINES TAURUS/SABLE - 3.0 LITRE ENGINES NOTE: VEHICLES LOCATED IN NEWFOUNDLAND, NOVA SCOTIA, NEW BRUNSWICK AND PRINCE EDWARD ISLAND. THE THROTTLE MAY

ON 4X4 VEHICLES, THE FRONT WHEEL BEARING ADJUSTING NUT RETAINING KEYS MAY HAVE BEEN OMITTED. IF THE KEY IS MISSING, THE LEFT FRONT WHEEL BEARING NUT MAY LOOSEN. THIS COULD LEAD TO

On certain vehicles, wiring for the power lumbar seat system was routed directly beneath the seat cushion springs on the side of the cushion. This could result in the insulation be

ON VEHICLES WITH EFI OR CFI, THE SPRING-LOCK FUEL LINE COUPLING USED TO CONNECT THE FUEL SUPPLY AND RETURN LINES TO THE EFI FUEL RAILS OR TO THE CFI THROTTLE BODIES AS WELL AS OTHE

VEHICLES EQUIPPED WITH 2.9 LITRE E.F.I.,V6 ENGINES, THERE IS A POSSIBILITY THAT A NYLON FUEL LINE ON THE FUEL RETURN SIDE OF THE FUEL PRESSURE REGULATOR ASSEMBLY MAY CRACK AND LEAK

ON VEHICLES WITH FRONT-DRIVE AUTOMATIC LOCKING HUBS THE CAM IN THE FRONT HUB LOCKING MECHANISM MAY BE INCORRECTLY HEAT TREATED. THE CAM COULD FRACTURE UPON ENGAGEMENT OF THE FRONT

THE UPPER TORSO RESTRAINT D-RING WHICH ATTACHES THE SHOULDER BELT TO THE B PILLAR, UNDER CERTAIN TEST CONDITIONS, SEPARATED FROM ITS ANCHORAGE, AND MAY NOT COMPLY WITH CMVSS 210 -