Ford E450 Recalls

On certain vehicles, the electrical connector for the backup alarm could loosen and disconnect. As a result, the vehicle may not make a reverse warning sound when backing up.

Issue: On certain vehicles, the recall repairs completed by a Ford dealer during recall 20S73 (Transport Canada recall no. 2020-633) may not have been done correctly. As a result,

On certain vehicles, the power steering pressure line may not be properly connected to the brake booster. As a result, power steering fluid could leak and cause a loss of power ste

Issue: On certain trucks, a defect inside the transmission could cause the park pawl not to engage when the transmission is shifted to the park (P) position. If this happens, the t

On certain vehicles, paint on the fuel tank seam could peel off. Over time, the fuel tank could corrode and create a fuel leak.

The compliance label on certain vehicles may be missing the tire size, rim type, and tire inflation pressure information. This could lead you to inflate the tires incorrectly or in

On certain vehicles, the power steering pressure line may not be properly connected to the brake booster. As a result, power steering fluid could leak and cause a loss of power ste

Issue: On certain vehicles, the insulation for the engine cover may not be positioned correctly. As a result, some surfaces inside the vehicle could get hot while the engine is run

On certain vehicles, a wire harness in the rear of the vehicle could be damaged by contact with the vehicle frame. If this happens, the engine could stall and you may not be able t

Certain vehicles may not comply with Canada Motor Vehicle Safety Standard 208 - Occupant Protection in Frontal Impacts. Prescribed text may have been omitted from the airbag warnin

Certain vehicles may have been equipped with a driver power seat track assembly that was inadvertently manufactured with an incorrect worm gear. As a result, the driver seat may no

On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle

On certain vehicles, a wiring harness that is not compatible with the vehicle circuit polarity may have been inadvertently installed during servicing for recall 2005028 or 2007258.

On certain vehicles equipped with a 7.3L diesel engine, the camshaft position sensor may fail, causing the engine to stall. Engine stalling would result in lost propulsion which, i

On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The failure mode appears to be different than t

On certain vehicles equipped with a 6.0L diesel engine, the Fuel Injection Control Module (FICM) wire harness may chafe against an engine bolt. Also, the Injection Control Pressure

On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle

Certain E-450 cut-away incomplete vehicles do not comply with the requirements of CMVSS 120. The rear tire pressure is incorrectly listed on the compliance label. Correction: Ford