Honda Prelude Recalls

On certain vehicles, the interlock operation of the ignition switch may not function properly, making it possible to turn the ignition key to the OFF position and remove the key wi

On certain vehicles electrical contacts in the ignition switch can degrade due to the high electrical current passing through the switch when the vehicle is started. Worn contacts

On certain vehicles, the front suspension lower ball joints may prematurely wear out due to improper finishing of the surface of the spherical portion of the ball joints between th

On certain vehicles, the platic front seatbelt release buttons may break allowing plastic pieces to fall into the buckle assembly. If this should happen, a no latch, false latch or

On certain vehicles, road salt may cause the fuel filler and/or breather pipe to rust through, resulting in fuel leakage. In the presence of an igntion source a vehicle fire could

On certain vehicles, the accelerator pedal stopper may be bent when excessive downward force is applied after the pedal has contacted the stopper. In the worst case, the edge of th

On certain vehicles, the power steering supply hose at the connector clamp seal could develop a small leak. If the fluid were to contact the exhaust manifold a fire could result. C

On certain Prelude SI vehicles, throttle body castings may contain slight porosity. During vehicle usage, coolant seepage may occur and eventually residue may accumulate on the thr

On certain vehicles, prolonged contact with road salt may, under certain conditions, cause eventual corrosion which could weaken the front and rear strut coil spring support bracke

On certain vehicles, corrosive elements in the environment may cause deterioration of the front and rear lower suspension arms. This corrosion may result in loss of vehicle control