‹ Search all recalls

Ihc Paystar Recalls

13 Transport Canada safety recalls for the Ihc Paystar, model years 1971–1986. Tap any recall for the hazard, affected models, and corrective action.

Ihc Paystar — Fuel System High risk

Apr 24, 1986 Model years: 1985, 1986

THE FUEL INJECTION PUMP THROTTLE SHAFT BUSHING MAY BE CONTAMINATED WITH A HEAT SENSITIVE CASTING SEALER WHICH CAN SOLIDIFY ON THE BUSHING AT NORMAL ENGINE OPERATING CONDITIONS AND

Also affects: Ihc Cargostar, Ihc S Series

Ihc Paystar — Seats And Restraints High risk

Apr 14, 1986 Model years: 1985, 1986

VEHICLES ARE EQUIPPED WITH SEAT BELTS THAT CAN LOOSEN AS THE VEHICLE IS DRIVEN. THE NON-LOCKING RETRACTOR WILL TAKE UP ANY BELT SLACK, GIVING THE FALSE IMPRESSION THAT THE BELT IS

Also affects: Ihc S Series, Ihc 9370, Ihc Co 9670

Ihc Paystar — Not Entered High risk

Feb 22, 1984 Model years: 1984

THE POSITION OF THE HINGE PIN WHICH CONNECTS THE BRAKE PEDAL TO THE FLOOR MOUNMTING PLATE IS SECURED BY A COTTER PIN. THAT COTTER PIN MAY HAVE BEEN OMITTED DURING ASSEMBLY OF THE S

Also affects: Ihc Transtar

Ihc Paystar — Not Entered High risk

Nov 17, 1980 Model years: 1979, 1980

TRUCKS BUILT AT FORT WAYNE FROM AUGHTS 1979 TMEASURE DISTANCE TRUCKS BUILT AT FORT WAYNE FROM AUGHTS 1979 THROUGH AUGUST 1980. THE NUTS WHICH FASTEN THE TAPERED TIE EOD ENDS TO THE

Also affects: Ihc Transtar, Ihc S Series

Ihc Paystar — Not Entered High risk

Sep 19, 1979 Model years: 1975, 1976, 1977, 1978, 1979

TRUCKS EQUIPPED WITH EATON 16.5 X 5 INCH S-CAM FRONT WHEEL AIR BRAKES. THE BRAKE SPIDERS MAY DEVELOP CRACKS NEAR THE CAMSHAFT MOUNTING BOSS WHICH CAN PROGRESS UNTIL THE CAMSHAFT BO

Also affects: Ihc Cargostar, Ihc Fleetstar, Ihc Loadstar, Ihc S Series, Ihc Transtar

Ihc Paystar — Suspension High risk

Feb 21, 1979 Model years: 1977, 1978

VEHICLES EQUIPPED WITH 12,000 POUND FRONT AXLES AND KELSEY HAYES GUNITE DIVISION CAST FRONT SPOKE WHEELS. GUNITE DIVISION CAST FRONT SPOKE WHEELS MAY EXPERIENCE SPOKE CRACKING AS A

Also affects: Ihc Fleetstar, Ihc S Series, Ihc Schoolbus, Ihc Transtar

Ihc Paystar — Not Entered High risk

Sep 22, 1977 Model years: 1975, 1976, 1977

TRUCKS AND TRUCK-TRACTORS EQUIPPED WITH ROCKWELL INTERNATIONAL 16K AND 18K FRONT AXLES WITH DISC WHEELS AND ROCKWELL FORGED ALUMINUM HUBS. ROCKWELL INTERNATIONAL HAS DETERMINED THA

Also affects: Ihc Cargostar, Ihc Cof-5370, Ihc Fleetstar, Ihc S Series, Ihc Transtar

Ihc Paystar — Not Entered High risk

May 21, 1976 Model years: 1976

VEHICLES EQUIPPED WITH ROCKWELL TANDEM TYPE REAR AXLES. THE REAR AXLE HOUSING (# RA 14328) MAY FIAL AS A RESULT OF THE FRICTION WELD LOCATION RELATIVE TO THE OIL SEAL JOURNAL RADIU

Also affects: Ihc Fleetstar, Ihc Transtar

Ihc Paystar — Not Entered High risk

Mar 16, 1976 Model years: 1973, 1974, 1975, 1976

VEHICLES EQUIPPED WITH FA-136 FRONT AXLES AND DUAL STEERING. A FORGING FLAW COULD RESULT IN BREAKAGE OF THE LEFT OR RIGHT STEERING ARM ON UNITS EQUIPPED WITH DUAL POWER STEERING.

Also affects: Ihc Fleetstar, Ihc Loadstar, Ihc Transtar

Ihc Paystar — Not Entered High risk

Jun 26, 1975 Model years: 1971, 1972, 1973, 1974, 1975

VARIOUS MALUFNCTIONS OF THE SERVICE BRAKES ANTI-LOCK COMPUTER MODULE SYSTEM CAN OCCUR WHEN THE MODULE IS SUBJECTED TO HIGH OUTPUT RADIO FREQUENCY ENERGY DURING RADIO TRANSMISSION O

Also affects: Ihc Cargostar, Ihc Conco, Ihc Fleetstar, Ihc Loadstar, Ihc Transtar

Ihc Paystar — Not Entered High risk

Jun 12, 1975 Model years: 1973, 1974, 1975

A DESIGN DEFICIENCY OF WALL THICKNESS INBOARD OF THE OIL SEAL AREA MAY CAUSE CRACKS IN THE AXLE HOUSING SPINDLE THAT COULD ULTIMATELY LEAD TO BREAKAGE OF THE SPINDLE END OF THE AXL

Also affects: Ihc Fleetstar, Ihc Transtar

Ihc Paystar — Not Entered High risk

May 21, 1975 Model years: 1974, 1975

TRUCKS EQUIPPED WITH ALLISON MT650 TRANSMISSIONS. TRANSMISSION GOVERNOR ASSEMBLIES MAY CONTAIN NYLON CHIPS WHICH WOULD PLUG THE GOVERNOR VALVE OIL PORT. IF THIS OCCURS, THE TRANSMI

Also affects: Ihc Cargostar, Ihc F8500m, Ihc Fleetstar, Ihc Loadstar

Ihc Paystar — Not Entered High risk

Mar 25, 1975 Model years: 1975

A QUANTITY OF CAM BRAKE ANCHOR PINS WAS FOUND TO BE PROCESSED (HARDENED) INCORRECTLY. IF CAM BRAKES WERE TO BE ASSEMBLED USING THE IMPROPERLY PROCESSED ANCHOR PINS, A FRACTURE OF T

Also affects: Ihc Cargostar, Ihc Fleetstar, Ihc Loadstar, Ihc Transtar

Check any vehicle by VIN
Get every open recall for your exact vehicle, or build it into your app.