Isuzu Nrr Recalls

On certain trucks, the chassis and cab wiring harnesses may not have been routed properly. As result, the wiring could become damaged by contact with nearby components and cause a

On certain electric trucks, an electrical connection in the sub-junction box could overheat. If this happens, a warning light would turn on and there could be a loss of power to th

On certain electric trucks, the two different types of coolant that were used could react together and damage the high-voltage cooling system. As a result, the high-voltage system

On a small number of trucks, the wrong instrument panel cluster may have been installed. As a result, the instrument panel cluster will not provide warnings to the driver when or b

On certain trucks, the seal on the fuse holders for the ignition coil packs may be too small. As a result, water could leak into the fuses and cause them to corrode or fail. If thi

On certain trucks, the antilock braking system (ABS) module and, if equipped, the optional advanced driver assistance systems (ADAS) camera may not have been recalibrated after a m

Issue: On certain trucks equipped with a gasoline engine, the connector for the oil pressure sensor was wired incorrectly. As a result, the oil pressure warning light will not turn

On certain trucks, the U-bolts that attach the rear axle to the suspension may not be properly tightened. As a result, the axle could slide back and separate from the propeller sha

On certain vehicles, the seat belts may be assembled incorrectly. As a result, the seat belts may not properly lock-up in certain types of crashes.

On certain trucks, the lug nuts on the rear-outer wheels were not properly tightened during assembly. This could cause the nuts to loosen or fall off, and could result in a wheel s

On certain vehicles, the odometer display may show the units of distance as miles instead of kilometers. The actual number display is in kilometers.

On certain vehicles, the left rear wheel bearing hub locking bolts may not have been properly torqued during assembly. This could cause the bolts to loosen and break, which could a

On certain vehicles, a burr could impede contact between the transmission mounting bracket and the chassis cross member. This could cause the fasteners to shear or break, allowing

Certain trucks equipped with an automatic transmission could experience a sudden transmission failure. This would result in a loss of vehicle propulsion which, in conjunction with

On certain vehicles equipped with an oil pan heater, over time, dust, dirt and moisture may collect at the contact point between the oil pan heater cord and the extension cord. As

Certain trucks equipped with an automatic transmission could experience a sudden transmission failure. This would result in a loss of vehicle propulsion which, in conjunction with

On certain trucks, the propeller shaft may not have received adequate heat treatment during the manufacturing process. As a result, the shaft may break and fall off while the vehic