Kawasaki Ninja Zx-10r Recalls

On certain motorcycles, the engine oil pressure relief valve may not have been assembled correctly. As a result, there may not be enough engine oil pressure. This can cause the oil

On certain motorcycles, the engine could backfire when the quick shift function is used at high engine load. If this happens, the air suction valve(s) could become damaged. As a re

On certain motorcycles, depending of the shifting manner a gear in the transmission may break. If the gear were to break, it could cause a loss of motive power and/or cause the rea

On certain motorcycles, the steering damper bracket's mounting bolts may have been over torqued during assembly. This could cause the bolts to potentially break, which could result

On certain motorcycles, a porous engine crankcase could allow oil to leak from the machined area at the starter mounting point and pool on top of the crankcase. The oil could then

On certain motorcycles, the voltage regulator can overheat, causing uncontrolled current output which can provide insufficient charge to the battery. This can cause engine stalling

On certain motorcycles, the main wiring harness can contact a bolt and a rivet located in the tail section of the vehicle. The resultant chafe damage could, over time, create an el

On certain motorcycles, the bolt that attaches the steering damper body to the frame bracket may not have been tightened sufficiently during vehicle assembly. If the bolt loosens a

On certain motorcycles, the front wheel may contain casting flaws that could lead to a possible failure of the wheel, creating the possibility of an accident resulting in injury or