Kenworth T470 Recalls

On certain trucks, the reservoir tank for the air brake system is too small. In certain situations, this could cause reduced braking. Canadian regulations require enough air reserv

On certain trucks, the fasteners that attach the steer arm to the steering knuckle may fail. If this happens, the steer arm could separate from the steering knuckle and cause a los

Issue: On certain trucks, the hoses between the fuel pump and remote fuel filter may be defective and could leak. Note: This recall only affects trucks equipped with a Cummins 2021

Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 121 - Air Brake Systems. The two service brake connections of the SR-7 spring brake va

Certain vehicles equipped with HID headlamps may not comply with the requirements of Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. A Dayti

On certain vehicles, water could migrate into wiper motor head and could lead to internal corrosion. This internal corrosion could form a conductive salt bridge which could result

On certain vehicles, brake chamber diaphragm(s) may not be properly seated. This could lead to brake drag, causing brake overheating or unintended spring brake application. These i

On certain vehicles equipped with Cummins ISB and ISL engines, the fuel filter shell and nut plate could separate, causing a fuel leak and also causing the engine to stall. Stallin

On certain vehicles, the seat belts may not comply with Canada Motor Vehicle Safety Standard 209 - Seat Belt Assemblies. Due to a defect in manufacturing, the seat belt buckle may

The stop/turn/tail lights used on certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 108 - Lighting System and Retroreflective De

On certain trucks, the alternator wiring may come into contact with the exhaust manifold, which could result in a fire causing injury and/or damage to property. Correction: Dealers

On certain trucks equipped with an Allison automatic transmission, the neutral start switch may have been incorrectly programmed during vehicle assembly. As such, the engine may be

On certain trucks, an internal defect in the ignition switch can cause the starter to engage when the key is partially inserted. This would allow the engine to start unexpectedly,

On certain trucks equipped with Bendix ATR-6 Antilock Traction Relay valves, in extremely cold conditions (at or below -18 degrees Celsius), internal ATR valve leakage can occur. T

On certain vehicles, the slack adjuster housings may have been manufactured incorrectly, which could allow the housings to fracture and fail. As a result, the wheel brake to which

On certain vehicles, one of the harness spade terminal connections to the chassis load center may become completely unseated. An unseated connection may result in a power loss to a