Lion C Recalls

On certain school buses, the malfunction indicator for the electronic stability control (ESC) system may not turn on even if there's a problem with the ESC system.

On certain school buses, the control panel for the heating, ventilation and air conditioning (HVAC) system may not have been manufactured properly. As a result, the wiring could ov

On certain school buses, the CAN bus connector for the high-voltage battery may not have been installed properly. As a result, water could enter the connector and cause a short cir

On certain school buses, the parking brake lever could be released without pushing the release button. As a result, the bus could move unexpectedly.

On certain school buses, the antilock braking system (ABS) valves and rear wheel speed sensors may not have been connected correctly. As a result, the vehicle could become unstable

On certain school buses, the high-voltage cables could be damaged by contact with the surge tank. If this happens, there could be a sudden loss of power while driving, including a

On certain school buses, hardware inside the high-voltage distribution unit (HVDU) and DC junction box (DCJB) could loosen and detach. If this happens, the loose hardware could cau

On certain school buses, the driver's fixed front side window and fixed rear windows may not have been installed correctly. As a result, the window glass could separate and fall fr

On certain school buses, the rubber mounts for the main hydraulic pump could break and cause the pump to detach from the frame. This could cause a sudden loss of power steering ass

Issue: On certain electric school buses, the electronic stability control (ESC) tell-tale lamp is not bright enough. As a result, you may not be able to see the warning lamp when t

On certain school buses, the parking brake may not be adjusted correctly. As a result, the vehicle could roll when the parking brake is set.

On some electric school buses, a lack of pressure from the hydraulic pump could cause a loss of power assist to the braking and steering systems. This would cause reduced braking p

The auxiliary pump for the hydraulic brake system may lose power due to a manufacturing defect in its connector. In the event of a primary pump failure, the auxiliary pump would no

Certain school bus seats may not have the lower universal anchorage system required for installing a child seat.

Certain school buses do not meet the joint strength requirements of the Canadian regulations. In a crash, the ceiling joint could split.