Polaris 800 Rmk Recalls

On certain snowmobiles, the welds on the upper steering brackets may have insufficient penetration. This could cause steering components to loosen or separate, which could affect s

Polaris Industries is conducting a voluntary Safety Advisory Program involving throttle assemblies on certain snowmobiles. The throttle assembly located on the right handlebar coul

Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard 1201 - Snowmobile Standards. The rear reflector may have been oriented at a downward a

On certain snowmobiles, the front lower left shock bolt may have been tightened incorrectly and could fail, causing unexpected limited steering and front left suspension collapse.

On certain snowmobiles, the rear slide rail suspension rail tip attachment bolt may fail. Should the rail tip separate from the rail, the front of the rail could contact the track.

On certain snowmobiles, incorrect High Density Polyethylene (HDPE) material was used to mold the top of the fuel tank. This material is not designed for use with gasoline. Over tim

On certain snowmobiles, the fuel tank could crack around the filler neck. Such a crack could result in filler neck separation which would allow fuel to escape, creating a fire haza

On certain snowmobiles, the collar welded to the steering post can sometimes result in a weakening of the steering post due to an undercut condition at the weld toe, resulting in a