Yamaha Yzf-R1 Recalls

On certain motorcycles, the front wheel size may appear incorrectly. There is a shadow character that appears in the space following the first 'J' of the wheel rim size. You may se

On certain motorcycles, the second gear wheel and the pinion gears in the transmission may be of inadequate strength. In high stress cases, this could cause internal components in

On certain motorcycles, the rear shock absorber may not have been manufactured correctly. The piston rod nut may have been tightened before the piston had the correct full metal-to

On certain motorcycles, the headlamp connector may overheat and melt, affecting headlamp function. This could compromise driver visibility and increase the risk of a crash causing

On certain motorcycles, an improperly designed Throttle Position Sensor (TPS) could cause an intermittently unstable idle when the motorcycle is stopped or during low-speed operati

On certain vehicles, the front brake pad material could separate from the backing plate due to insufficient adhesion. If pad separation occurs, there could be loss of braking abili

On certain motorcycles, the screws holding the side stand switch may loosen and fall out due to engine heat and vibration. If this happens, the side stand switch will not function

On certain motorcycles, a coolant hose clamp at the thermostat housing may not have been properly tightened and could permit the hose to come off during motorcycle operation. Steam