Altec At Series Recalls

On certain aerial devices and digger derricks, the cable step wire ropes that secure the entry step could fail. As a result, the cable could detach and cause a person to fall.

On certain aerial devices, voltage spikes in the power distribution module could damage the transfer case control module. As a result, the system could detect the wrong driving mod

Issue: On certain aerial devices, the fuel lines may not have been secured properly and could become damaged. As a result, fuel could leak. Safety Risk: A fuel leak can create the

On certain aerial devices, the front axle capacity may be too low. As a result, the vehicle could be overloaded. This could cause poor handling and lead to a loss of control.

On certain aerial devices, the wiring in the engine compartment may have been routed incorrectly. As a result, the wiring could become damaged by contact with the hood. If this hap

On certain aerial devices and digger derricks, the inverter module may not have proper circuit protection for the AC output. As a result, the wiring could overheat and melt.

On certain vehicles, water could leak into the strobe light assembly. If this happens, the strobe light could short circuit.

Issue: Over time, the 12-V power wire for the boom stow sensor on certain aerial devices could be damaged by contact with a sharp edge. If this happens, the wire could short circui

On certain aerial devices, the 120 V electrical outlet from the generator does not have proper circuit protection.

On certain aerial devices with an aluminum work platform, the mounting holes on the aluminum platform could crack or elongate and fail, increasing the risk of injury to the operato

Certain aerial devices could be operated without the outriggers being properly deployed. If operated under this condition, it could lead to instability, increasing the risk of inju