Ic Ce School Bus Recalls

Issue: On a small number of school buses, the compliance label lists the wrong gross vehicle weight rating (GVWR). This could lead to overloading of the school bus and cause poor h

On certain vehicles, the engine oil cooler base plate may crack, allowing pressurized oil to leak into the engine compartment. This may cause engine shut down without warning, and

Certain school buses fail to comply with the requirements of CMVSS 209 - Seat Belt Assemblies. (1) The driver's seat, when in the highest and rearmost position, may lean against a

On certain buses, the park brake system may activate while the vehicle is under normal operation. Although the vehicle is brought to a stop in a safe, controlled manner, the activa

On certain buses, cracks in the vertical support arms of the Ricon Corporation platform style wheelchair lifts may allow the mechanism to twist during stowage, preventing closure o

On certain buses, the door control bracket for the door control arm does not meet the requirements for door entrance and handrail design. Failure to meet the specification can resu

On certain vehicles, the anchor bolt that is the pivot point for the driveline parking brake shoes may fatigue and break. If the bolt breaks, the park brake may not engage. This co

On certain school buses, the microswitch which controls the stop arm position can malfunction intermittently in operating conditions below 0 degrees Celsius, possibly causing the s

On certain buses, a spring pin may have been substituted during vehicle assembly for the required cotter retaining pin in the exterior locking control of the optional entrance door

On certain IC Corporation school buses, the locknut that secures the brake pivot pin bolt may not be torqued properly. Without proper torque, the locknut may back off the brake ped