International 9200i — Lights And Instruments
High risk
May 18, 2023
Model years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Issue: On certain trucks, the backup lamps could be blocked and may not be visible. As a result, the trucks don't meet the requirements of the Canadian regulations. Note: This reca
Also affects: International 8100, International 9100i, International 9400i, International 8500, International 9900i
International 9200i — Electrical
High risk
Feb 28, 2003
Model years: 2002, 2003
On certain vehicles, the cable from the starter to the battery stud on the alternator may break off at the alternator end, due to vibration in the cable, if the wire harness is not
Also affects: International 9100i, International 9400i, International 9900i
International 9200i — Brakes
High risk
Dec 17, 2002
Model years: 2003
On certain vehicles, the bolts and locking nuts that secure the brake spiders or brake anchor plates to the axles on the right side may have been under-torqued. The nuts cannot bac
Also affects: International 9900i, International 9400i, International 9100i
International 9200i — Steering
High risk
Jun 20, 2001
Model years: 2001
Certain heavy duty vehicles equipped with a 20,000 pound rated Dana I-200 front steer axles. There are visible cracks in the seal diameter and large bearing diameter on the front a
Also affects: International 4000, International 5500i, International 2000, International 8100
International 9200i — Brakes
High risk
Jan 29, 2001
Model years: 1996, 1997, 1998, 1999, 2000, 2001
On certain vehicles, the automatic slack adjuster anchor brackets can fail due to fatigue fracture and completely separate, causing the slack adjusters to function as manual slack
Also affects: International 9100, International 9900i, International 9200, International 9400, International 9100i
International 9200i — Seats And Restraints
High risk
Jun 16, 2000
Model years: 1998, 1999, 2000
On certain vehicles, the four bolts that hold the bunk webbing restraint latch brackets to the bunk base may be of an incorrect grade. Grade 5 bolts were used in lieu of the requir
Also affects: International 9200, International 9300, International 9400, International 9400i, International 9900
International 9200i — Brakes
High risk
Feb 29, 2000
Model years: 1999
On certain vehicles, the Antilock Traction Relay Valves manufactured by Bendix were incorrectly assembled. An extra check valve was installed which will not allow the traction cont
Also affects: International 2574, International 2674, International 5000, International 8100, International 9100
International 9200i — Brakes
High risk
Jan 18, 2000
Model years: 1999
Certain vehicles do not comply with the requirements of CMVSS. 121 - Air Brake Systems. A defective check valve in the air brake system caused the maximum air pressure increase to
Also affects: International 9100i, International 9400i, International 9900i
International 9200i — Steering
High risk
Nov 12, 1999
Model years: 1999
On certain vehicles, the steering columns may have a defective or mislocated weld that if broken would cause a complete loss of steering control. This could result in a possible cr
Also affects: International 9100i, International 9400i
RecallTracker